ormolu
A formatter for Haskell source code
https://github.com/tweag/ormolu
| LTS Haskell 23.1: | 0.7.4.0@rev:5 |
| Stackage Nightly 2024-12-26: | 0.7.7.0@rev:1 |
| Latest on Hackage: | 0.7.7.0@rev:1 |
ormolu-0.7.7.0@sha256:2c1d251f4d5cfb08d3826ccabca1afa8699c8531612283ec8f7e6a8edc2416ed,6056Module documentation for 0.7.7.0
- Ormolu
- Ormolu.Config
- Ormolu.Diff
- Ormolu.Exception
- Ormolu.Fixity
- Ormolu.Imports
- Ormolu.Parser
- Ormolu.Printer
- Ormolu.Printer.Combinators
- Ormolu.Printer.Comments
- Ormolu.Printer.Internal
- Ormolu.Printer.Meat
- Ormolu.Printer.Meat.Common
- Ormolu.Printer.Meat.Declaration
- Ormolu.Printer.Meat.Declaration.Annotation
- Ormolu.Printer.Meat.Declaration.Class
- Ormolu.Printer.Meat.Declaration.Data
- Ormolu.Printer.Meat.Declaration.Default
- Ormolu.Printer.Meat.Declaration.Foreign
- Ormolu.Printer.Meat.Declaration.Instance
- Ormolu.Printer.Meat.Declaration.OpTree
- Ormolu.Printer.Meat.Declaration.RoleAnnotation
- Ormolu.Printer.Meat.Declaration.Rule
- Ormolu.Printer.Meat.Declaration.Signature
- Ormolu.Printer.Meat.Declaration.Splice
- Ormolu.Printer.Meat.Declaration.Type
- Ormolu.Printer.Meat.Declaration.TypeFamily
- Ormolu.Printer.Meat.Declaration.Value
- Ormolu.Printer.Meat.Declaration.Warning
- Ormolu.Printer.Meat.ImportExport
- Ormolu.Printer.Meat.Module
- Ormolu.Printer.Meat.Pragma
- Ormolu.Printer.Meat.Type
- Ormolu.Printer.Operators
- Ormolu.Printer.SpanStream
- Ormolu.Processing
- Ormolu.Terminal
- Ormolu.Utils
Ormolu
- Installation
- Building from source
- Usage
- Troubleshooting
- Limitations
- Running on Hackage
- Forks and modifications
- Contributing
- License
Ormolu is a formatter for Haskell source code. The project was created with the following goals in mind:
- Using GHC’s own parser to avoid parsing problems caused by
haskell-src-exts. - Let some whitespace be programmable. The layout of the input influences the layout choices in the output. This means that the choices between single-line/multi-line layouts in certain situations are made by the user, not by an algorithm. This makes the implementation simpler and leaves some control to the user while still guaranteeing that the formatted code is stylistically consistent.
- Writing code in such a way so it’s easy to modify and maintain.
- Implementing one “true” formatting style which admits no configuration.
- The formatting style aims to result in minimal diffs.
- Choose a style compatible with modern dialects of Haskell. As new Haskell extensions enter broad use, we may change the style to accommodate them.
- Idempotence: formatting already formatted code doesn’t change it.
- Be well-tested and robust so that the formatter can be used in large projects.
Try it out in your browser at https://ormolu-live.tweag.io! See Ormolu Live for more info.
Installation
The release page has binaries for Linux, macOS and Windows.
You can also install using cabal or stack:
$ cabal install ormolu
$ stack install ormolu
Ormolu is also included in several package repositories. E.g., on Arch Linux, one can use the package on AUR:
$ yay -S ormolu
Building from source
The easiest way to build the project is with Nix:
$ nix build
Make sure to accept the offered Nix caches (in particular the IOG cache), otherwise building may take a very long time.
Alternatively, stack could be used as follows:
$ stack build # to build
$ stack install # to install
To use Ormolu directly from GitHub with Nix flakes, this snippet may come in handy:
{
inputs.ormolu.url = "github:tweag/ormolu";
outputs = { ormolu, ... }: {
# use ormolu.packages.${system}.default here
};
}
Usage
The following will print the formatted output to the standard output.
$ ormolu Module.hs
Add --mode inplace to replace the contents of the input file with the
formatted output.
$ ormolu --mode inplace Module.hs
Use find to format a tree recursively:
$ ormolu --mode inplace $(find . -name '*.hs')
Or find all files in a project with git ls-files:
$ ormolu --mode inplace $(git ls-files '*.hs')
To check if files are are already formatted (useful on CI):
$ ormolu --mode check $(find . -name '*.hs')
:zap: Beware git’s core.autocrlf on Windows :zap:
Ormolu’s output always uses LF line endings. In particular,
ormolu --mode check will fail if its input is correctly formatted
except that it has CRLF line endings. This situation can happen on Windows
when checking out a git repository without having set core.autocrlf
to false.
Ormolu Live
On every new commit to master, Ormolu Live is deployed to
https://ormolu-live.tweag.io. Older versions are available at
https://COMMITHASH--ormolu-live.netlify.app.
Editor integration
We know of the following editor integrations:
- Emacs
- VS Code
- Vim: neoformat, vim-ormolu
Haskell Language Server
Haskell Language Server has built-in support for using Ormolu as a formatter.
GitHub actions
run-ormolu is the recommended way to ensure that a project
is formatted with Ormolu.
Language extensions, dependencies, and fixities
Ormolu automatically locates the Cabal file that corresponds to a given
source code file. Cabal files are used to extract both default extensions
and dependencies. Default extensions directly affect behavior of the GHC
parser, while dependencies are used to figure out fixities of operators that
appear in the source code. Fixities can also be overridden via an .ormolu
file which should be located at a higher level in the file system hierarchy
than the source file that is being formatted. When the input comes from
stdin, one can pass --stdin-input-file which will give Ormolu the location
that should be used as the starting point for searching for .cabal and
.ormolu files.
Here is an example of .ormolu file:
infixr 9 .
infixr 5 ++
infixl 4 <$
infixl 1 >>, >>=
infixr 1 =<<
infixr 0 $, $!
infixl 4 <*>, <*, *>, <**>
It uses exactly the same syntax as usual Haskell fixity declarations to make it easier for Haskellers to edit and maintain.
As of Ormolu 0.7.0.0, .ormolu files can also contain instructions about
module re-exports that Ormolu should be aware of. This might be desirable
because at the moment Ormolu cannot know about all possible module
re-exports in the ecosystem and only few of them are actually important when
it comes to fixity deduction. In 99% of cases the user won’t have to do
anything, especially since most common re-exports are already programmed
into Ormolu. (You are welcome to open PRs to make Ormolu aware of more
re-exports by default.) However, when the fixity of an operator is not
inferred correctly, making Ormolu aware of a re-export may come in handy.
Here is an example:
module Control.Lens exports Control.Lens.At
module Control.Lens exports "lens" Control.Lens.Lens
Module re-export declarations can be mixed freely with fixity overrides, as long as each declaration is on its own line. As of Ormolu 0.7.1.0 explicit package names are allowed in re-export declarations (see the example above).
Finally, all of the above-mentioned parameters can be controlled from the command line:
- Language extensions can be specified with the
-oor--ghc-optflag. - Dependencies can be specified with the
-por--packageflag. - Fixities can be specified with the
-for--fixityflag. - Re-exports can be specified with the
-ror--reexportflag.
Searching for .cabal and .ormolu files can be disabled by passing
--no-cabal and --no-dot-ormolu respectively.
Magic comments
Ormolu understands two magic comments:
{- ORMOLU_DISABLE -}
and
{- ORMOLU_ENABLE -}
This allows us to disable formatting selectively for code between these
markers or disable it for the entire file. To achieve the latter, just put
{- ORMOLU_DISABLE -} at the very top. Note that for Ormolu to work the
fragments where Ormolu is enabled must be parseable on their own. Because of
that the magic comments cannot be placed arbitrarily, but rather must
enclose independent top-level definitions.
Regions
One can ask Ormolu to format a region of input and leave the rest
unformatted. This is accomplished by passing the --start-line and
--end-line command line options. --start-line defaults to the beginning
of the file, while --end-line defaults to the end.
Note that the selected region needs to be parseable Haskell code on its own.
Exit codes
| Exit code | Meaning |
|---|---|
| 0 | Success |
| 1 | General problem |
| 2 | CPP used (deprecated) |
| 3 | Parsing of original input failed |
| 4 | Parsing of formatted code failed |
| 5 | AST of original and formatted code differs |
| 6 | Formatting is not idempotent |
| 7 | Unrecognized GHC options |
| 8 | Cabal file parsing failed |
| 9 | Missing input file path when using stdin input and accounting for .cabal files |
| 10 | Parse error while parsing fixity overrides |
| 100 | In checking mode: unformatted files |
| 101 | Inplace mode does not work with stdin |
| 102 | Other issue (with multiple input files) |
Using as a library
The ormolu package can also be depended upon from other Haskell programs.
For these purposes only the top Ormolu module should be considered stable.
It follows PVP starting from the version
0.5.3.0. Rely on other modules at your own risk.
Troubleshooting
Operators are being formatted weirdly!
This can happen when Ormolu doesn’t know or can’t determine the fixity of an operator.
-
If this is a custom operator, see the instructions in the Language extensions, dependencies, and fixities section to specify the correct fixities in a
.ormolufile. -
If this is a third-party operator (e.g. from
baseor some other package from Hackage), Ormolu probably doesn’t recognize that the operator is the same as the third-party one.Some reasons this might be the case:
- You might have a custom Prelude that re-exports things from Prelude
- You might have
-XNoImplicitPreludeturned on
If any of these are true, make sure to specify the reexports correctly in a
.ormolufile.
You can see how Ormolu decides the fixity of operators if you use --debug.
Limitations
- CPP support is experimental. CPP is virtually impossible to handle correctly, so we process them as a sort of unchangeable snippets. This works only in simple cases when CPP conditionals surround top-level declarations. See the CPP section in the design notes for a discussion of the dangers.
Running on Hackage
It’s possible to try Ormolu on arbitrary packages from Hackage. For that execute (from the root of the cloned repo):
$ nix build .#hackage.<package>
Then inspect result/log.txt for possible problems. The derivation will
also contain formatted .hs files for inspection and original inputs with
.hs-original extension (those are with CPP dropped, exactly what is fed
into Ormolu).
Forks and modifications
We know of the following actively maintained forks:
- Fourmolu, which uses 4-space indentation and allows arbitrary configuration.
Contributing
See CONTRIBUTING.md.
License
See LICENSE.md.
Copyright © 2018–present Tweag I/O